Surface Finishing

ISO 1302 surface roughness symbols and what changed under ISO 21920

What ISO 1302 means on a drawing

ISO 1302 surface roughness is the drawing language many manufacturers still associate with graphical surface texture symbols and short written indications. It matters because a large number of legacy manufacturing drawings still use ISO 1302:2002 symbols to tell machinists, finishers, and inspectors what a surface must achieve.

The status of the standard is important. The public ISO catalogue identifies ISO 1302:2002 as withdrawn and replaced by ISO 21920-1:2021. For that reason, new controlled documents should not treat ISO 1302 as the current ISO reference unless customer or contractual requirements say otherwise. In practice, ISO 1302 remains a necessary reading skill for older drawings, while ISO 21920 is the current direction for profile-based surface texture specification. For broader context on finishing choices, see our surface finishing coverage.

abstract, antique, desktop backgrounds, art, background, brass, break, brown, 4k wallpaper, full hd wallpaper, wallpaper 4k, copper, cracks, crumpled, damaged, decoration, decorative, design, effect, faded, foil, gold, free wallpaper, golden, grunge, illustration, luxury, messy, metal, windows wallpaper, beautiful wallpaper, modern, laptop wallpaper, mottled, nature, ornament, pattern, mac wallpaper, orange nature, cool backgrounds, orange background, orange abstract, free background, orange art, hd wallpaper, orange design, 4k wallpaper 1920x1080, wallpaper hd, orange pattern, orange metal, orange natural

What ISO 1302 was designed to communicate

ISO 1302:2002 belongs to the geometrical product specifications, or GPS, framework. It was not written to list preferred roughness grades or prescribe a machining process. Its role was to define how surface texture requirements are indicated in technical product documentation, including drawings, specifications, contracts, and inspection reports.

That distinction is practical, not academic. A surface callout is not automatically a process instruction. A turned, ground, milled, lapped, polished, or blasted surface may be acceptable if it meets the specified texture requirement and all other dimensional, geometric, material, coating, and functional requirements. If a designer needs a specific process for functional reasons, that process has to be stated clearly rather than inferred from Ra alone.

The ISO abstract for ISO 1302:2002 described its application to profile parameters associated with roughness, waviness, and primary profile evaluation. It also connected the notation to motif parameters and material ratio curve parameters from related ISO standards. This is why the common phrase surface roughness is narrower than the standard itself. Roughness is only one part of surface texture; the drawing system can also communicate other profile-based requirements.

ISO 1302 also set a boundary around what surface texture parameters can express. Surface imperfections such as pores, scratches, dents, or isolated defects are not reliably controlled by a normal roughness parameter. Those issues need separate specification language and acceptance criteria, not a general expectation that a low Ra value will remove every defect risk.

The three basic symbol messages

Legacy ISO 1302 drawings commonly rely on three surface texture symbol ideas:

  • The basic surface texture symbol indicates that a surface texture requirement applies, but it does not by itself define a machining method.
  • A symbol with the material-removal indication tells the manufacturer that material removal is required to create the specified surface.
  • A symbol with the no-material-removal indication tells the manufacturer that removal of material is not permitted for that surface. This can be important for cast, forged, coated, or previously finished surfaces.

The exact graphical layout, symbol proportions, and placement rules should be taken from the purchased standard or the customer drawing standard. In production, the most common problem is usually not the shape of the symbol. It is assuming that the symbol contains more information than the callout actually states.

Why ISO 1302 still appears in manufacturing files

Although ISO 1302:2002 is withdrawn, it remains visible because industrial drawings have long service lives. Tooling, aerospace parts, machinery frames, molds, shafts, replacement components, and customer-controlled parts may stay in production for decades. If the released drawing references ISO 1302, the supplier normally has to interpret that drawing until the customer formally revises it.

There are also practical reasons for continued searches and shop-floor questions:

  • Older CAD templates and drawing libraries may still include ISO 1302-style symbols.
  • Purchasing documents may refer to a drawing revision created before ISO 21920-1:2021 was published.
  • Suppliers may receive mixed packages in which older parts use ISO 1302 and newer parts use ISO 21920 notation.
  • Inspection departments may need to confirm whether a callout is a roughness limit, a waviness requirement, a material ratio requirement, or only a visual surface note.
  • Manufacturing engineers may need to quote a part but cannot estimate cost until the surface texture requirement is interpreted correctly.

For these reasons, ISO 1302 should be treated as legacy knowledge, not obsolete trivia. A withdrawn standard can still be contractually relevant when a released drawing cites it.

How to read a legacy ISO 1302 callout

A reliable reading method starts with the surface symbol, then moves outward to the parameter, value, modifier, and any attached process or lay requirement. Do not begin by translating everything into a generic surface finish chart. Those charts can help with rough quoting, but they cannot replace the drawing note.

Callout element Typical meaning What to verify before manufacturing
Symbol form Indicates whether surface texture is specified and whether material removal is required or prohibited. Confirm the drawing standard and revision because symbol details differ between legacy and current systems.
Parameter Identifies what is being limited or controlled, such as Ra, Rz, waviness, or another profile parameter. Check that the inspection equipment and software support the named parameter.
Numerical value States the surface texture value, commonly in micrometres for metric ISO drawings. Confirm whether the value is an upper limit, lower limit, range, or another type of specification.
Manufacturing method May require a process such as grinding, lapping, or machining if explicitly written. Do not infer a mandatory process from Ra alone unless the drawing says so.
Lay direction Controls the direction of the predominant surface pattern when functional performance depends on it. Confirm how the lay symbol relates to the view, sealing direction, sliding direction, or fluid flow direction.
Evaluation details May specify sampling length, filters, or other measurement settings. Resolve missing settings before inspection if the result could change with instrument setup.

A quick example without over-reading it

If a legacy drawing shows a surface texture symbol with Ra 1.6, many shops will read it as a roughness requirement of 1.6 micrometres Ra on the indicated surface. That may be enough for a routine machined face when the contract, standard, and inspection practice are well understood. It is not enough to assume the manufacturing process, bearing behavior, sealing performance, or cosmetic appearance. Two surfaces can share the same Ra value and still differ in peak shape, spacing, directionality, waviness, and functional performance. See also: CNC Machining.

ISO 1302 and ISO 21920 are not the same thing

The standards change is straightforward, but it is easy to miss in day-to-day drawing work. ISO 1302:2002 was the older ISO document for indicating surface texture in technical product documentation. ISO 21920-1:2021 is the newer ISO document for indication of profile-based surface texture. The related ISO 21920 series also includes ISO 21920-2 for terms, definitions, and parameters, and ISO 21920-3 for specification operators. Public ISO catalogue entries show the 21920 parts as published in December 2021 and also show revision activity, so controlled engineering teams should verify the latest purchased editions before releasing new drawing rules.

Topic Legacy ISO 1302 approach Current ISO 21920 direction
Status ISO 1302:2002 is listed by ISO as withdrawn. ISO 21920-1:2021 is listed as the replacement for surface texture indication by profile methods.
Main role Rules for graphical symbols and textual indications on technical product documentation. Rules for indicating profile surface texture, supported by separate parts for parameters and operators.
Practical risk Older callouts may depend on historical defaults or local company practice. Newer notation aims to make the specification operator and settings clearer, but users must learn the changed system.
Best use today Interpretation of legacy drawings and existing contracts. Creation or revision of new ISO-based surface texture specifications.

Migration should be handled deliberately. Simply replacing an old symbol with a new one may change the meaning if parameter definitions, filtering, default settings, or acceptance rules also change. For high-risk parts, the safer method is to review function, measurement method, and supplier capability before issuing a drawing revision.

Practical implications for machining and inspection

Surface texture can affect friction, lubrication, sealing, wear, coating adhesion, fatigue performance, appearance, and cleanability. Because those functions differ, a single roughness number should not be used as a universal quality target. A decorative cover, hydraulic sealing land, bearing journal, adhesive bonding surface, and fatigue-critical shoulder may need very different texture controls even when the nominal material and machining process are similar.

For manufacturing planning, ISO 1302-style roughness notes influence several decisions:

  • Process route: turning or milling may be enough for moderate roughness requirements, while grinding, honing, lapping, polishing, or superfinishing may be needed for tighter or functionally sensitive surfaces.
  • Cost and lead time: tighter surface requirements often add setup time, slower feeds, extra finishing passes, dressing operations, or separate inspection steps.
  • Tooling and fixturing: chatter, deflection, tool wear, vibration, and coolant control can prevent a process from meeting the intended texture even when the nominal feed and speed appear suitable.
  • Inspection method: stylus size, filter selection, evaluation length, cutoff settings, and surface accessibility can all affect reported results.
  • Drawing clarity: if the surface is critical, the drawing should identify more than Ra when peak height, bearing area, waviness, lay, or process direction matters.

Avoid treating Ra as a universal finish

Ra is popular because it is easy to communicate and widely measured, but it is an average. It does not show whether the profile has sharp peaks, deep valleys, a plateaued bearing surface, periodic tool marks, or objectionable waviness. For sealing, sliding, fatigue, and lubrication applications, other parameters or additional notes may be necessary. This is one reason the move from a simple shop-floor roughness mindset toward a broader surface texture specification system matters.

Checklist for using or converting legacy notes

  1. Identify the drawing standard and revision. If the title block or general notes cite ISO 1302, treat the callout as legacy ISO language unless the customer says otherwise.
  2. Record the exact parameter and value. Do not convert Ra, Rz, and other parameters by rule of thumb for acceptance decisions.
  3. Check whether material removal is required, prohibited, or unrestricted. This can affect castings, forgings, coated surfaces, heat-treated surfaces, and additive parts.
  4. Confirm measurement settings before inspection. Missing cutoff, filter, or evaluation details should be resolved for critical features.
  5. Review function before revision. A surface that has worked in production may depend on more than the printed Ra value.
  6. When converting to ISO 21920, involve design, manufacturing, quality, and the customer if the drawing is contract controlled.
  7. Keep supplier communication written. If a legacy symbol is ambiguous, document the agreed interpretation before cutting parts.

The useful takeaway is not memorizing a symbol chart. It is recognizing that ISO 1302, ISO 21920, parameter definitions, measurement settings, and manufacturing capability all interact. A clear surface texture note reduces inspection disputes, helps suppliers quote correctly, and avoids unnecessary finishing cost where the function does not justify it.

Frequently asked questions

Is ISO 1302 still valid for new drawings?

ISO lists ISO 1302:2002 as withdrawn and replaced by ISO 21920-1:2021, so it should not be the default reference for new ISO-based drawings. However, if an existing released drawing or contract explicitly cites ISO 1302, it remains relevant for interpreting that document until the controlling party revises it.

Does ISO 1302 define standard roughness values?

ISO 1302 was mainly an indication standard. It explained how to place surface texture requirements on technical documentation. The designer still had to choose the parameter, value, and any functional constraints using the relevant parameter and measurement standards.

Is Ra enough for most machined parts?

Ra may be enough for noncritical surfaces where appearance, assembly, or general machining quality is the main concern. It is often not enough for sealing, sliding, fatigue-sensitive, lubricated, or precision bearing surfaces because surfaces with the same Ra can behave differently.

What should a supplier do when ISO 1302 and ISO 21920 notes appear in the same package?

The supplier should not guess. The safest approach is to list the affected drawing numbers, quote the exact callouts, ask which standard controls each feature, and record the customer response. Mixed standards are common during drawing transitions, and written clarification prevents inspection disputes later.